To look at spares drawing click on Picture

Please note: Every effort is made to advertise correct prices, but they may be subject to change without notice. E & OE. For current price contact Ian

E MAIL OR PHONE FOR PRICES

          

 

Top. 2013 pipe adjustable, 

Middle. M Type pipe ali adjustable, 

Bottom. M Type pipe steel fixed length.  

 

  27 ALPHA  
Code Item description  
     
C92800 COOLING JACKET  
C92801 JACKET SCREWS  
C92802 JACKET O RINGS  
C92803 WATER NIPPLES  
C92804 HEAD  
C92805 HEAD SHIM .2  
C92806 HEAD SCREWS  
C92807 CRANKCASE  
C92808 PISTON AND LINER  
C92809 PISTON  
C92810 RING  
C92811 WRIST PIN CLIPS  
C92812 WRIST PIN  
C92813 WRIST PIN NEEDLE BEARING  
C92814 CONROD  
C92815 NEEDLE BEARING  
C92816 CRANK PIN  
C92817 CRANKSHAFT  
C92818 BALL BEARING F/R  
C92819 FRONT HOUSING  
C92820 FRONT O RING  
C92821 FRONT SCREWS  
C92822 SEAL  
C92823 KEY  
C92824 ROTOR  
C92825 STATOR  
C92826 STAT SCREWS  
C92827 PULLY  
C92828 PULLY SCREWS  
C92829 COUPLING  
C92830 DISC  
C92831 BACKPLATE  
C92832 ORING BACKPLATE  
C92833 BACKPLTE SCREWS  
C92834 INSULATOR FLANGE  
C92835 INSULATOR O RING  
C92836 CARBURETTER  
C92837 CARB BARREL + COVER  
C92838 CARB RUBBER SEAL  
C92839 CARB SPRING  
C92840 COVER SCREWS  
C92841 ARM  
C92842 CARB SCREWS 5X45  
C92843 COIL  
C92844 PLUG CAP  
C92845 SPARK PLUG  
C92846 EXHAUST HEADER ENGINE SIDE  
C92847 EX HEADER O RING  
C92848 EX HEADES SCREWS  
C92849 PIPE O RING  
C92850 ADJUSTABLE ANGLE EX HEADER  
C92851 SPRINGS  
C92852 ENGINE MOUNT  
C92853 L PLATES  
C92854 RUBBERS  
C92855 SCREW SET ENGINE MOUNT  
C92856 WATER COOLED ENGINE MOUNT  
C92857 W/C L PLATES  
C92858 RUBBERS  

 

 

 

 

 
click picture for full size Breakdown view of prototype 27cc
 

    IF ALL TESTS GO TO PLAN COULD BE AVAILABLE IN APRIL

NEW 27CC ONLY BACK PLATE AND CARB TO BE FITTED AND READY TO TEST

 

C30015
PIPE MARINE 26 HIGH TORQUE

 

NEW PIPE BETTER TORQUE AND THROTTLE AT SHORTER LENGTH

 

 

 

CMB NEW 27cc Prototype case casting

 

FIRST PHOTO OF THE NEW CMB 27CC ZIMMERMAN DISC ENGINE THAT IS IN DEVELOPMENT

WAX TEST OF THE CASE                          

This will be the first engine totally designed by Mauro Braghieri

The engine will have a Zimmerman disc ringed piston seperate brass chromed liner and separate head and water jacket.Possibly 2 types of ignition either a small diameter Italian made magneto system or a electronic system.

The first tests may be before the end of 2011.